| Customization: | Available |
|---|---|
| Carrier: | PP |
| Color: | White |
|
Still deciding? Get samples of US$ 1.5/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Name: | Polypropylen e |
| Synonyms: | PROPYLEN E RESIN;PROPYLEN E, ISOTACTIC RESIN;POLYPROPYLEN E ;POLYPROP YLENE, ATACTIC;POLYPROPYLEN E, PSS NANOREINFORCED;POLYPROPYLEN E, ISOTACTIC;Polypropylen e master batch,flame retarding;Polypropylen e,film grade |
| CAS: | 9003-07-0 |
| MF: | C22H42O3 |
| MW: | 354.56708 |
| EINECS: | 202-316-6 |
| Product Categories: | Nanomaterials;POSS Polymers;Polymers;Hydrophobic Polymers;Olefins;Silsesquioxanes: POSS? Nanohybrids; ;Hydrophobic Polymers;Materials Science;Polymer Science |
PP Polypropylen e is a white waxy material with a transparent and light appearance. The chemical formula is (C3H6)n, the density is 0.89~0.91g/cm3, It is flammable, with a melting point of 189ºC, softening at about 155ºC, and the use temperature range is -30~140ºC . It is resistant to corrosion by acids, alkalis, salt solutions and a variety of organic solvents below 80°C, and can be decomposed under high temperature
| Number | Project | Unit | H40S | Test value | Test Methods | ||||||
| 1 | Melt mass-flow rate(MFR) | Nominal value | g/10min | 37 | 37.3 | GB/T 3862 | |||||
| ±37 | Deviation | ||||||||||
| 2 | Isotactic index | % | >=96.0 | 97.51 | GB/T 2412 | ||||||
| 3 | Particle appearance | Color grain | Pc/kg | <=5 | 0 | SH/T 1541-2006 | |||||
| Black grain | Pc/kg | 0 | 0 | ||||||||
| Large and small grains | g/kg | <=100 | 0.1 | ||||||||
| Snake skin grains and trailing grains | Pc/kg | report | 25 | ||||||||
| 4 | Impurities and others | Pc/kg | no | no | SH/T 1541-2006 | ||||||
| 5 | Ash | % | <=0.030 | 0.014 | GB/T 9345.1 | ||||||
| 6 | Tensile properties | Tensile modulus of elasticity(Et) | MPa | >=1200 | 1250 | GB/T 1040 | |||||
| Tensile yield stress(σ y) | MPa | >=30.0 | 30.9 | ||||||||
| Tensile stress atbreak(σ B) | MPa | >=8.0 | 20.7 | ||||||||
| Nominal tensile strain at break(ε tB) | % | >=200 | 566 | ||||||||
| Test conclusion | Qualified | ||||||||||
| Polypropylen e Chemical Properties |
| Melting point | 157 °C |
| Boiling point | 120-132 °C |
| density | 0.9 g/mL at 25 °C (lit.) |
| refractive index | n20/D 1.49(lit.) |
| storage temp. | -20°C |
| form | particles (Spherical) |
| Odor | odorless |
| Merck | 13,7663 |
| NIST Chemistry Reference | Polypropylen e, atactic(9003-07-0) |
| IARC | 3 (Vol. 19, Sup 7) 1987 |
| EPA Substance Registry System | Polypropylen e (9003-07-0) |
Polypropylen e (PP) is a thermoplastic material used in a wide variety of applications including packaging, labeling, textiles, etc. Due to high processability and low cost, PP is one of the most extensively produced polymers, especially, for auto industry. Pristine PP is resistant to photo-oxidation and thermal oxidation at moderate temperatures. However, PP is sensitive to various external aging environments (such as heat, light, and radiation), and, hence, has a relatively low service temperature.When PP is exposed to high temperatures or to an irradiation environment, the tertiary hydrogen atoms present in PP chains are susceptible to be attacked by oxygen. It is well known that PP oxidation depends on both light and temperature in outdoor aging conditions. PP can also be photo-degraded because several molecular chains are affected in the wavelength range from 310 to 350 nm. Used with ram- and screw-injection machines. For automotive, housewares, general molding products and multi- and monofiliment fiber. |
Hebei Rongxintong Industrial Co., Ltd. is the specialized chemical, processing and sales enterprise.
Our products enjoy good reputation both at home and abroad.Our trade partners are around the world, mainly in America,Europe,Australia,South East Asia ,Middle East and South Africa. In order to serve customers well, the company has established special technical department and after-sale service department. We will make careful reply if you get any question.
The company with all the employees will constantly purse excellent quality, perfect brand and our image, and adheres to our spirit of honesty, diligence, seeking truth and progress and insists on business philosophy of quality as life and service as soul. We will satisfy market demands by top products and better service, and will welcome market challenge forever.
· 1kg/aluminium foil bag, with two plastic bags inside.
1. Are you a trading company or a factory?
Yes, we are a factory with nearly 20 years of experience.
2. How do you control the quality?
We have professional quality inspectors and keep samples of each order for two years, so we also support third party testing, such as SGS, BV, etc.
3. What are your payment terms?
T/T or L/C AT SIGHT for first time cooperation.
4. What is the weight of your unit package?
25kg or 50kg with PE bag or as your requirement.
5. Can I get samples before I order?
Yes, of course you can, we will give you free samples within 3 days.
6. Can I package it according to my logo?
Of course you can, you just need to provide the package design.
7. What is the delivery time?
The delivery time for sample orders is usually 4-7 working days after receiving full payment. For bulk orders, it is about 10-20 working days after receipt of deposit.
8. What is the port of loading?
Usually Shanghai, Qingdao or Tianjin (major ports in China).
){kind=link}