| Customization: | Available |
|---|---|
| Carrier: | Poe |
| Color: | White |
|
Still deciding? Get samples of US$ 1/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Polyethylene oxide is a linear polyether, depending on the degree of polymerization, can be liquid, grease, waxy and solid powder, white to slightly yellow. The n of the solid powder is higher than 300, the softening point is 65~67 °C, the embrittlement point is -50 °C, and it is thermoplastic; Low relative molecular mass is a viscous liquid, soluble in water.
Polyethylene oxide is completely water-soluble and soluble in many solvents; non-ionic polymers; Efficient thickening (high viscosity even at very low concentrations); Because it is a thermoplastic resin, Chemicalbook has good ductility, plasticity and bending properties; Prevent biological invasion; Reduces the friction of liquids; It can be combined with a variety of polar resins (such as urea resin,etc.).
| POE 8450 | |||
| Physical Properties | Test Standard | Value | Unit |
| Desnity 23ºC | ASTM D792 | 0.902 | g/cm³ |
| Melt Index 190ºC 2.16kg | ASTM D1238 | 3 | g/10min |
| Mooney Viscosity ML1+4 121ºC | ASTM D1646 | 10 | MU |
| Hardness Properties | Test Standard | Value | Unit |
| Shore Hardness A 1s Compression Molded | ASTM D2240 | 90 | |
| Shore Hardness D 1s Compression Molded | ASTM D2240 | 41 | |
| Mechanical Properties | Test Standard | Value | Unit |
| Tensile Strength Break 510 mm/min Compression Molded | ASTM D638 | 22.4 | MPa |
| Tensile Modulus Compression Molded | ASTM D638 | 7.3 | MPa |
| Elongation Break 510 mm/min Compression Molded | ASTM D638 | 750 | % |
| Tear ing Strength Die C | ASTM D624 | 90.2 | KN/m |
| Flexural Modulus | ASTM D790 | 75.6-76.3 | MPa |
| Thermal Properties | Test Standard | Value | Unit |
| Vicat | ASTM D1525 | 84 | ºC |
| Melting Temperature DSC 10ºC/min | - | 97 | ºC |
| TG | Internal methods | -32 | ºC |
| Crystallization Temperature DSC | 80 | ºC | |
25kg/bag
Polyethylene oxide is a water-soluble and thermoplastic non-ionic linear polymer, the relative molecular weight of 200-20000 products are called polyethylene glycol (PEG), they are viscous liquid or waxy solid, molecular relative mass greater than 1x105 products are called polyoxy chemicalbookated ethylene (PEO), the concentration of the active end group of such resin is low, there is no obvious end group activity. It has the properties of flocculation, thickening, slow release, lubrication, dispersion, retention, water retention, etc., and is non-toxic and non-irritating. It has a wide range of applications in papermaking, coatings, inks, textile printing and dyeing, daily chemical and other industries.
It is a non-ionic linear polymer with water solubility and thermoplasticity, which has flocculation, thickening, slow release, lubrication, dispersion, retention, water retention and other properties, and is non-toxic and non-irritating. It has a wide range of applications in papermaking, coatings, inks, textile printing and dyeing, daily chemical and other industries.
Hebei Rongxintong Industrial Co., Ltd. is the specialized chemical, processing and sales enterprise.
our products enjoy good reputation both at home and abroad.Our trade partners are around the world, mainly in America,Europe,Australia,South East Asia ,Middle East and South Africa. In order to serve customers well, the company has established special technical department and after-sale service department. We will make careful reply if you get any question.
The company with all the employees will constantly purse excellent quality, perfect brand and our image, and adheres to our spirit of honesty, diligence, seeking truth and progress and insists on business philosophy of quality as life and service as soul. We will satisfy market demands by top products and better service, and will welcome market challenge forever.
1. Are you a trading company or a factory?
Yes, we are a factory with nearly 20 years of experience.
2. How do you control the quality?
We have professional quality inspectors and keep samples of each order for two years, so we also support third party testing, such as SGS, BV, etc.
3. What are your payment terms?
T/T or L/C AT SIGHT for first time cooperation.
4. What is the weight of your unit package?
25kg or 50kg with PE bag or as your requirement.
5. Can I get samples before I order?
Yes, of course you can, we will give you free samples within 3 days.
6. Can I package it according to my logo?
Of course you can, you just need to provide the package design.
7. What is the delivery time?
The delivery time for sample orders is usually 4-7 working days after receiving full payment. For bulk orders, it is about 10-20 working days after receipt of deposit.
8. What is the port of loading?
Usually Shanghai, Qingdao or Tianjin (major ports in China).
){kind=link}